Introduction

SEIS-UK can supply the following broadband sensors and external data logging systems. System specifications can be found by following the links provided below. Information regarding shipping is also provided.

Sensors
photo: Guralp 3TDphoto: Guralp 40TD
photo: Guralp CMG-DCM
30s instruments
  Guralp CMG-40TD (for long-term deployments of 1-2 years)
120s instruments
  Guralp CMG-3T (analogue)*
  Guralp CMG-3TD (digital) *
    * Masses require locking and unlocking for transportation
 
External Data Logging Systems
For digital sensors:
  Guralp DCM or EAM
  Guralp Satellite Modem DCMs (seven available)
    Internal satelite modem allows a broadband instaltion to be remotely configured and monitored in even the most remote of locations. photo: Nanometrics Taurusphoto: Guralp 40TD
   
     
For analogue sensors:
  Nanometric's Taurus system
 

The sensitivity, low-noise performance and external logging system of these instruments makes their installation and operation more complex than the 6TD. A minimum of half a day is required to deploy each instrument but substantially more time is required to produce the highest quality data.

Additional information can be found on the manuals & downloads page.

Much of the information presented below is from Guralp Systems Ltd and Nanometrics Inc.

Sensor Specification: CMG- 3T

Total number 15
Digitiser
n/a
Masses
Three Orthogonal masses (XYZ). Require locking/unlocking.
Data output
Analogue
Memory
None - requires external unit
Data Download
n/a
System control
Instrument control is via Nanometrics Taurus or breakout box
Power consumption
0.75W
Power supply
12V ( 10-36V DC range).
Dimensions
Height: 430mm; Diameter: 170mm
Weight
13.5kg
Frequency response
120sec to 50Hz
Sampling rate
10-500sps (Nanometrics Taurus )
Operating temperature
-20°C to 65°C

GPS

n/a

Return to top

Sensor Specification: CMG- 3TD

Total number 28
Digitiser
Integrated 24bit CMG-DM24 digitiser
Masses
Three Orthogonal masses (XYZ). Require locking/unlocking.
Data output
GCF format
Memory
Small flash buffer only - Requires external unit
Data Download
Serial
System control
Instrument control is via Guralp software available for Windows and Linux platforms, as well as on Palm computers.
Power consumption
2.5W with hourly cycled GPS
Power supply
12V ( 10-36V DC range)
Dimensions
Height: 430mm; Diameter: 170mm
Weight
15kg
Frequency response
120sec to 50Hz
Sampling rate
1- 200sps
Operating temperature
-20°C to 65°C

GPS

External GPS antenna

Return to top

Sensor Specification: CMG- 40TD

Total number 20
Digitiser
Integral 24bit
Masses
Three Orthogonal masses (XYZ) - No mass locking
Data output
GCF
Memory
Requires external unit (small flash buffer only)
Data Download
n/a.
System control
Instrument control is via Guralp software available for Windows and Linux platforms, as well as Palm computers.
Power consumption
2.3W with hourly cycled GPS
Power supply
12V (10-36V DC range)
Dimensions
Height: 207mm; Diameter: 154mm
Weight
5kg
Frequency response
30sec to 100Hz
Sampling rate
1-200sps
Operating temperature
-10°C to 60°C

GPS

External GPS antenna

Return to top

Datalogger Specification: CMG-DCM and CMG-EAM

Total number 50
Digitiser
n/a
Data output
GCF
Memory
Removable 40gb USB/firewire hard drive or USB stick. 128mb integral flash.
Data Download
Disk swap. MiniSEED, GCF and SAC formats available.
System control
Instrument control is via a web browser. Communication can be through an RS232 port, ethernet port or modem.
Power consumption
~1W
power supply
12V ( 10-36V DC range).
Dimensions
250mm x 200mm x 180mm
Weight
3.2kg
Sampling rate
n/a
Operating temperature
-40°C to 60°C (disk heater as standard)

GPS

n/a

Return to top

Datalogger Specification: CMG-DCM with satelite modem

Total number 7
Digitiser
n/a
Data output
GCF
Memory
Removable 40gb USB/firewire hard drive. 128mb integral flash.
Data Download
Disk swap. MiniSEED, GCF and SAC formats available.
System control
Instrument control is via a web browser. Communication can be through an RS232 port, ethernet port or intergral satelite modem.
Power consumption
power supply
12V ( 10-36V DC range).
Dimensions
250mm x 200mm x 250mm
Weight
6kg
Sampling rate
n/a
Operating temperature
-40°C to 60°C (disk heater as standard)

GPS

n/a

Return to top

Datalogger Specification: Taurus

Total number 15
Digitiser
24bit
Data output
MiniSEED
Memory
Removable 40Gb 1.8" ATA hard drive (sufficient for 600 days recording on 3 channels at 100 sps) or user-supplied removable compact flash.
Data Download
Both the hard drive and flash card can be swapped, or data download can be via ethernet or serial (slow).
System control
Instrument control is via a web browser through ethernet or modem port (serial port also available)
Power consumption
1.1W or 1.5W with user interface enabled with cycled GPS
power supply
12V ( 9-36V DC range)
Dimensions
264mm x 147mm x 60mm
Weight
1.8kg
Sampling rate
10-500sps
Operating temperature
5-55°C with hard disk (-20°C to 60°C compact flash)

GPS

External GPS antenna

Return to top

Shipping information

Broadband instruments ship in boxes containing 1 instrument (3T, 3TD or 40TD), 1 data logging system (DCM or Taurus), one power regulator (if required), 1 GPS external antenna and all associated cables. There are two sizes of shipping box available.

Most projects use one or two 36W solar panels per instrument, details of which can be found here. The user must provide 12v batteries. We recommend sealed lead-acid of at least 65Ah capacity.

SEIS-UK is able to offer advice on the appropriate number of solar panels and batteries necessary for your period and latitude of deployment.

In normal circumstances the shipping of instruments is organised by SEIS-UK and paid for by the user. Because of the high demand of broadband instrumentation it is usually necessary to use airfreight. The cost and time for a shipment varies considerably from one destination to another.

Hofbauer cases
Box Volume (cubic meters) 0.154
Dimensions (mm) 620x400x620
Weight 3TD + SAM + all peripherals 35kg
3TD + DCM + all peripherals 31kg
3T + Taurus + all peripherals 35kg
40TD + DCM + all peripherals 22kg
 
Zarges cases
Box volume (cubic meters) 0.202
Dimensions (mm) 590x590x610
Weight 3TD + DCM + all peripherals 37kg
3T + Taurus + all peripherals  
40TD + DCM + all peripherals 29kg

Return to top